For your 2016 Keystone Cougar XLite Travel Trailer, you can use either the Solera RV Awning Roller Assembly # LCV000211486 or the Solera 16' Sand Fade w/ Black Weatherstrip RV Awning (Std) # LCV000223163, the only difference being the color of the fabric.
The Solera # LCV000223163 is in a sand fade color, while # LCV000211486 is in a black fade color.
We also have these other compatible roller with fabric assemblies:
-The Solera # LCV000211487 in solid black color.
-The Solera # LCV000211492... view full answer...
Great questions.
I have solutions for both questions.
Lippert does not sell replacement bolts or hardware kits for this application you will be able to source the bolts you need from any local hardware store.
As for a replacement options I strongly recommend the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps # MR98RR. They are a solid step that offers great stability. No more worries if your steps are going snap off and cause a fall.
You just need to make... view full answer...
If the bottom leg you are referencing on your Stromberg Carlson Electric Trailer Jack # JET-5000 is the foot pad, # 2500-3755G, then we do have a replacement.
If the bent leg is the tube that the jack foot goes into, that is not an available replacement part and the entire jack will need to be replaced with another # JET-5000.
I included videos of the products mentioned for you to take a look at. view full answer...
Yes, the Lippert Electric Trailer Brake Assembly # LC96WD will work with your 4,400 lb AL-KO axle. This braking assembly will replace your left side brakes, has a 4 bolt mounting flange, and measures 10" diameter x 2-1/4" wide. view full answer...
We have a light lens that fits your specifications exactly!
It's the Replacement Amber Lens for MC32AB Trailer Lights, part # A32AB. It's an amber, rectangular lens with rounded corners and measures at 2" wide by 4" long.
I've linked to a video review of this lens for you to look at. view full answer...
The correct wedge kit for the Curt Crosswing Lightweight 5th Wheel Trailer Hitch # C86JR is the Sidewinder Wedge for Curt CrossWing 5th Wheel Trailer Hitch # C85DR. view full answer...
I went out to the warehouse and measured the SolidStep Manual Fold-Down RV Steps # LC791572 and found the mounting bracket to be 21" in width and the actual body of the steps to be approximately 22-5/8" in width so you should have no problem installing these steps in your 24" opening.
You will most likely need to adjust the brackets that close up to the door threshold and hold it in the upright position. I've attached a short video below to help walk you through the installation process. view full answer...
The dimensions listed for the bolt pattern of the # K23-479-00 are close enough to what you have to indicate that they would fit properly on your axle. There's basically only one bolt pattern for assemblies and based on what you listed you have the correct bolt pattern. view full answer...
Thank you for the part number info on the hubs of your 2016 Keystone Cougar Xlite based that we can tell you have a 4,400 lb trailer axle so for a replacement hub you'd want the part # 8-407-5UC3-EZ. Then for brake assemblies you'd want the part # K23-478-479 and you'd be set. view full answer...
Hello Paul, the Lippert Electric Trailer Jack # LC285318 is a great choice for your 2017 Keystone Cougar 34TSB Travel Trailer. According to the online user guide, your camper has a hitch weight of 1,005 lbs, so a 3,500 lb rated tongue jack will certainly be up to the task.
It has a built in LED light and a manual crank option. Hopefully you will never need the manual crank but it nice to know you have that option if the need ever arises. You can expect the jack to move 6" in about 40... view full answer...
I really like the Ultra Fab Power Twin II part # UF39-941705 as it has two motors which allows it to move quicker and it fits a wider frame width range compared to other options as it fits frame widths of 48 to 80 inches. view full answer...
Stromberg Carlson has a RV Exterior Ladder! It just depends on what color you want. We carry a 99-1/2" x 12" # LA-401 or the black version # LA-401BA. If you didn't need that long of a ladder, you could get the Surco Universal Exterior RV Ladder which is 84-1/2 inches Long # SP502L.
I've included a review video of the Stromberg Ladder so check that out! view full answer...
If your brake assembly was manufactured by Dexter, Fayette, or Foreman, the # BP04-095 brake shoes you referenced are indeed the correct replacement. They are the same shape and design as the original brake shoes.
You can see a product description video by using the provided link. view full answer...
I'd be happy to help you figure out if the replacement strainer # 34465JNBSK10081 will fit in the sink of your 2014 Keystone Cougar, but there's no database for what sink was used.
The # 34465JNBSK10081 measures 3" in diameter, so as long as then drain in your sink also measures 3" this will fit fine. If you find you have a different size just let me know and I'll see what options are available. view full answer...
To reseal the window trim you'll want to first clean off the old sealant with some composite tools # PT73HJ (to prevent scratches to the trailer wall). Once the old sealant is removed you can clean the surface with some rubbing alcohol and then apply some non-sag sealant # 344270341437-1. view full answer...
The Ventline Exterior Wall Vent for RV Range Hood # V2111-55 has an overall width of 11-1/2" and height of 5-1/4". The collar is 1-3/4" deep and is designed to fit a 10-1/2" wide x 3-3/4" tall rough opening. Installation hardware isn't included so you'll want to pick up some screws from your local hardware store and some non-sag sealant # 344270341437-1 to seal around the edge of the vent for a waterproof seal. view full answer...
To upgrade to a higher spring bar rating with an Equal-i-Zer system you have to replace the bars and the head since the bars are all different sizes and the heads are made to fit them specifically. So for bars you'd need the part # EQ90-01-1299 and then for the correct head part # EQ90-02-1200 and you'd be set. view full answer...
Yes, the 32x48 Reese Solo Cargo Carrier for 2" Hitches # PS1040100 can be used with your 2017 Keystone Cougar Travel Trailer.
You are going to need a trailer hitch to use this cargo carrier so you'd need to add one with # C13702 if you don't already have one or you can just use the 24x40 etrailer Cargo Carrier for RV Bumper # e99050 instead which will bolt up to your bumper. view full answer...
The size of the replacement leaf springs on your 2012 Keystone Cougar 27RLS should be the same as what you have now. To be more specific, you need to match the length as well as the axle capacity. Based on the weight of your trailer it looks like you have 3,500 lb axles but I would check the axle tag to be sure.
The length is something you will have to measure. The standard is the spring eye to spring eye measurement. You can also use the flat measurement since your leaf springs will... view full answer...
Yes, the Reese Steadi-Flex Weight Distribution System w/ Sway Control # RP66560 will work with the Curt Weight Distribution Shank # C17132 on your 2020 Ford F-350. However, in order to use the Curt shank, you will need a hitch reduced on your 3-inch hitch in order to fit the 2-1/2 shank into your receiver. For a reducer, I recommend the Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2" # C45408. The installation is easy to use and slides directly into your hitch or onto the Curt shank. view full answer...